46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
Condensation detector to prevent the buildung of condensed water FAS 250VAC
| Previous | 2 / 3 | Next |
- GALLTEC DISTRIBUTOR MALAYSIA
- GALLTEC MELA MALAYSIA
- FAS Condensation detector malaysia
- Galltec Condensation detector malaysia
- FAS condensation detector for building
to monitor the formation of condensed water
with Polyga® humidity measuring element
breaking capacity max. 250VAC
The hygrostat module on PCB with Polyga® measuring element is arranged on a base plate so that the measuring element is in an immediate proximity to the base plate.
Protected by the housing, relative humidity near to dew point can form inside. The base plate is adjacent to the cooling pipe and transfers the cold to the measuring element.
The set point can be set inside and has to be adapted to the local conditions. The microswitch of the hygro module switches a changeover contact potential-free. The FAS 250VAC does not require a supply voltage resp. auxiliary energy.
with Polyga® humidity measuring element
breaking capacity max. 250VAC
The hygrostat module on PCB with Polyga® measuring element is arranged on a base plate so that the measuring element is in an immediate proximity to the base plate.
Protected by the housing, relative humidity near to dew point can form inside. The base plate is adjacent to the cooling pipe and transfers the cold to the measuring element.
The set point can be set inside and has to be adapted to the local conditions. The microswitch of the hygro module switches a changeover contact potential-free. The FAS 250VAC does not require a supply voltage resp. auxiliary energy.
Technical data
Measuring element
Control range
Service life
Control range
Service life
Polyga®-fiber
50...90 % RH
>6000 switching cycles
50...90 % RH
>6000 switching cycles
Accuracy
Influence of temperature
Influence of temperature
±3 % RH
±0.2 % RH / K based on 23 °C
based on 20 °C and 50 % RH
±0.2 % RH / K based on 23 °C
based on 20 °C and 50 % RH
Silver contacts
Breaking capacity max. 250 V AC and
0.1 ... 5 A at ohmic load (dehumid.)
0.1 ... 1 A at inductive load (power factor >0.8)
0.1 ... 5 A at ohmic load (dehumid.)
0.1 ... 1 A at inductive load (power factor >0.8)
Gold contacts
Breaking capacity max. 100mA 250V AC