46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
EC Instruments & Engineering Pte Ltd
50, Tuas Ave 11, #03-03,
Singapore 639107.
Singapore 639107.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
Condensation detector to prevent the buildung of condensed water FAS
| Previous | 1 / 3 | Next |
- GALLTEC DISTRIBUTOR MALAYSIA
- GALLTEC MELA MALAYSIA
- FAS Condensation detector
- building Condensation detector
- malaysia building condensation detector
to detect the building of condensed water
with Polyga® measuring element
Changeover contact with silver contacts
Breaking capacity max. 48VAC
The hygrostat module on PCB with Polyga® measuring element is arranged on an aluminium base plate so that the measuring element is in an immediate proximity to the base plate.
Protected by the housing, relative humidity near to dew point can form inside. The aluminium plate is adjacent to the cooling pipe and transfers the cold to the measuring element. The set point can be set inside and has to be adapted to the local conditions.
The microswitch of the hygro module switches a changeover contact potential-free. The standard switch is lined with silver contacts. Optionally there is a microswitch with gold contacts. The FAS does not require a supply voltage resp. auxiliary energy.
with Polyga® measuring element
Changeover contact with silver contacts
Breaking capacity max. 48VAC
The hygrostat module on PCB with Polyga® measuring element is arranged on an aluminium base plate so that the measuring element is in an immediate proximity to the base plate.
Protected by the housing, relative humidity near to dew point can form inside. The aluminium plate is adjacent to the cooling pipe and transfers the cold to the measuring element. The set point can be set inside and has to be adapted to the local conditions.
The microswitch of the hygro module switches a changeover contact potential-free. The standard switch is lined with silver contacts. Optionally there is a microswitch with gold contacts. The FAS does not require a supply voltage resp. auxiliary energy.
Technical data
Measuring element
Control range
Service life
Control range
Service life
Polyga®-fiber
50...90 % RH
>6000 switching cycles
50...90 % RH
>6000 switching cycles
Accuracy
Influence of temperature
Influence of temperature
±3 % RH
±0.2 % RH / K based on 23 °C
based on 20 °C and 50 % RH
±0.2 % RH / K based on 23 °C
based on 20 °C and 50 % RH
Changeover contact max. 48 V AC
at ohmic load for dehumidifying
at ohmic load for humidifying
at inductive load (power factor >0.8)
at ohmic load for dehumidifying
at ohmic load for humidifying
at inductive load (power factor >0.8)
Breaking capacity max. 48 V AC and
0,1 ... 5A 48VAC
0,1 ... 2A 48VAC
0,1 ... 1A 48VAC
0,1 ... 5A 48VAC
0,1 ... 2A 48VAC
0,1 ... 1A 48VAC
Gold contact max. 100 mA
Breaking capacity max. 48 V AC and 1 ... 100 mA