46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
XCSD1030W012VAA Single phase power supplies
| Previous | 1 / 20 | Next |
- CABUR SINGLE PHASE POWER SUPPLY Malaysia
- Single phase power supply IN: 120¨C230 Vac / OUT: 5¡15 Vdc max 4 A
- XCSD1030W012VAA
Single phase power supplies XCSD1030W012VAA
Single phase and DC input
Short circuit, overload, input and output overvoltage protections
Over temperature protection
Suitable for standard applications
Isolation Class 2, no grounding needed
| Series | Domotic Power |
|---|---|
| Code | XCSD1030W012VAA |
| Type | CSD1-030W/012V/AA |
| HS code | 85044083 |
| INPUT TECHNICAL DATA | |
| Input rated voltage | 120–230 Vac |
| Input voltage AC | 85…264 Vac |
| Input voltage DC | 100…370 Vdc (derating Uin |
| Frequency | 47…63 Hz |
| Current consumption | 0.56 A (120 Vac) / 0.34 A (230 Vac) |
| Inrush peak current | 5 A |
| Power factor | > 0.6 |
| Internal protection fuse | T 2 A |
| External protection on AC line | MT: C-3 A / Fuse: T-3 A |
| OUTPUT TECHNICAL DATA | |
| Output voltage range | 12 Vdc ±1% |
| Output adjustable range | 5…15 Vdc |
| Continuous current | 4A (5V), 2.9A (10V), 2.5A (12V), 2.0A (15V) at 55°C |
| Overload limiting | 6.9…3.0 A |
| Ripple @ nominal ratings | 50 mVpp |
| Hold up time | 12 ms (120 Vac) / 20 ms (230 Vac) |
| Status indication | LED ''DC OK'' |
| Parallel connection | possible |
| Redundant parallel connection | possible with external ORing diode |
| GENERAL TECHNICAL DATA | |
| Efficiency | 87% (120 Vac) / 86% (230 Vac) |
| Dissipated power | 4.1 W (120 Vac) / 4 W (230 Vac) |
| Operating temperature range | –20…+70°C (derating -1.2 W >55°C) |
| Input / output isolation | 3 KVac / 60 s (SELV output) |
| Input / ground isolation | class 2, without PE link |
| Output / ground isolation | class 2 without PE connection |
| Standard / approvals | EN 60950-1, EN 62368-1 |
| EMC Standard | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4 |
| Overvoltage category / pollution degree | II / 2 |
| Protection degree | IP 20 |
| Connection terminal | 2.5 mm² / 2.5 mm² |
| Housing material | UL94V-0 plastic material |
| Dimensions (LxHxD) | 53x62x90 mm |
| Approximate weight | 148 g |
| Mounting information | vertical on a rail, 10 mm from adjacent components |
| ACCESSORIES | |
| Mounting rail (IEC60715/TH35-7.5) | PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB |
| Alarm contact | no |
| Mounting rail (IEC60715/TH35-15) | PR/3/PP, PR/3/PP/ZB, PR/3/PA, PR/3/PA/ZB |
| APPROVALS AND MARKINGS |
    |
NOTES
Please refer to the datasheet for more details
Above overcurrent limit, the protection starts cycling in ON/OFF mode(hiccup autoreset), the maximum current supplied depends by the line resistance
For further information see PDF catalog