46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
EC Instruments & Engineering Pte Ltd
50, Tuas Ave 11, #03-03,
Singapore 639107.
Singapore 639107.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
CCD-BC00B-1618-TE3S-JRA
| Previous | 1 / 7 | Next |
Product Description
POSITAL IXARC Multiturn modular, kit encoder: BiSS C with Preset interface, Hollow design.
Interface
| Interface | BiSS C with Preset |
| Interface Cycle Time | ≥ 18 µs |
| Diagnostics | Stator-Rotor Air Gap and Start-up Procedure Check |
| Programming Functions | Via register communication: Wiegand sensor test, preset value and multiturn reinitialization |
| Cycle of Parameter Saving | 10 000 |
| Interface Remark | Binary |
Outputs
| Output Driver | RS422 |
| Connector | JST SM10B-GHS-TB (JST) |
Electrical Data
| Supply Voltage | 4.5 - 26.4 VDC |
| Current Consumption | Typical 200mA @ 5V (no load) |
| Start-Up Time | < 1 s |
| Clock Input | RS422 |
| Clock Frequency | 80 kHz - 10 MHz |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| Max. Permissible Electric Speed | 6000 1/min |
| EMC: Noise Immunity | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| MTTF | 105 years @ 60 °C |
Sensor
| Technology | Capacitive + Magnetic |
| Resolution Singleturn | 18 bit |
| Resolution Multiturn | 16 bit |
| Accuracy (INL) | ±0.02° |
| Code | Binary |
Environmental Specifications
| Protection Class (Housing) | IP20 |
| Min Temperature | -40 °C (-40 °F) |
| Max Temperature | +105 °C (221 °F) |
Mechanical Data
| Top Shield | Screwed |
| Housing Material | Plastic / Steel |
| Housing Coating | Zinc Plated |
| Shaft Type | Hollow |
| Shaft Material | Steel |
| Shaft Fastening Options | Shaft Set Screw |
| Maximum Axial / Radial Misalignment | ± 0.1 mm / ± 0.2 mm |
| Stator-Rotor Air Gap | 0.7 mm |
| Weight | 30 g (0.07 lb) |
| Rotor Inertia | ≤ 1000 gcm² [≤ 5.5 oz-in²] |
| Shock Resistance | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 20 g (half sine 11ms, ≤5 g (half sinus 30 ms) |
| Vibration Resistance | ≤ 20 g (20 Hz – 2000 Hz, EN 60068-2-6) |